The IP and MAC address of the Clarius Scanner can be found by following the below steps:
- Connect to the Clarius scanner via Wi-Fi Direct
To learn how to toggle between using the Clarius Ultrasound Scanner's Wi-Fi Direct, and your secure network, please see Switching Between Scanner's Wi-Fi Direct and a Local Wi-Fi Network
|
|
To ensure you are connected to the scanner, ensure you can see the reactive live exam for your Clarius Ultrasound. Note: If you are connecting via Wi-Fi-Direct, the scanner's own generated Wi-Fi, the IP address shown (encircled in red) is not the IP address that will be dynamically assigned when connecting via your clinic's own secure Wi-Fi network. You may ignore this IP address. For more information on the differences, please see Which Wi-Fi Should I Use? |
- From the top left hand corner, tap the arrow to go back and then access the icon for the main menu (three lines).
- From the main menu, select Status.
- The MAC Address and dynamically assigned IP address will appear if you are connected to the scanner as described in Step 1.
SSID: Note that in the example we are connected to DIRECT-________ : this is the scanner's own generated Wi-Fi Direct.
Thus, the IP Address below in the list, just as it was on the live exam page, is by default dynamically assigned to 192.168.1.1 - this is not the IP Address that will be dynamically assigned on your own secure WiFi network.
MAC Address: The specific ultrasound scanner's MAC Address can be found on the Status page. Please ensure that this MAC Address is whitelisted in your security infrastructure and Access Control Lists for your secure Wi-Fi network.
For all other concerns, please do not hesitate to contact Support via any of the methods noted in the following knowledgebase article: Getting Technical Support