The Foot Pedal can be set-up from the Clarius App's Settings page under Foot Pedals.
Note: The foot pedal is paired directly from the app and not from your smart device's Bluetooth setting.
Blue LED
Fast Blink | Foot pedal is searching or trying to connect to the Clarius app |
Slow Blink | Foot pedal is successfully connected to the Clarius app |
Resetting a Pedal on a Failed Connection
If the foot pedal cannot connect to the App, it may need to be reset by following the below steps:
- Close the Clarius App
- Turn on the foot pedal
- Hold power on the pedal for 6 seconds, LED will blink 3 times
- Turn on the app again
The foot pedal may also require reset pairing.